Sunday, June 5, 2016

The Truth About The Difference Between a Man and a Chicken

If there is one thing I have come to understand in my dealing with not only my own, but my good friends mental illnesses, is the differences between man and beast. it is not language or use of tools that separates us. It is simply being able to rationalize any given situation and turn from behavior that is irrational and instinctive.

In the barnyard, a chicken will be perceived as having a fault, a speck of blood on it's plumage. This is evolution's way of telling a mindless animal that this animal is not suitable for reproduction or sharing at the food trough. The rest of the chickens take it upon themselves to kill that chicken by pecking it to death. Soon, in doing so, they also get blood on their plumage and a massacre begins until hundreds of chickens are dead.

We as humans, at some time were in such perilously low numbers that a new perception came to light. We do not have to destroy the weak to protect ourselves. We can give them dignity and a right to exist, even if their plumage is not perfect.

This was the birth of the rational mind. All growth, and everything we are as a species grew from that moment. The only time we are in peril as a human species is when we adopt the basic instinct of a chicken and forget we are rational humans beings capable of accepting those different to us.

Recently I have seen a few "Straw Leaders" take a stand against people they do not know or understand. They see the spot of blood on the others plumage but forget the drenching of blood they were covered with in a former time and were spared. How quickly they devolve.

Turn your back on such people, their way is that of a mindless animal that knows not how to behave among civilized people. Once they realize they are being shunned for their lack of evolution as a human being, they will turn to education and learn the error of their ways. if not, they can rule a hen house full of chickens and never attain anything more. Don't be chicken. Be a rational human being.

LucidiousRage: Host of Mod Envy and Vaping Underground

Monday, February 16, 2015

Vapor Lady Lounge Vaping Coupon Code 20% off Limited Time!!

 

Just Click on The Vapor Lady Lounge link!

Good until February 28, 2015

Saturday, February 14, 2015

How to Fix a leaking Kanger Subtank

How to Fix a leaking Kanger Subtank:

The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Subtank. Allowing too much liquid to enter this tube can flood the atomizer and cause a leak through the bottom of the tank or liquid through the mouthpiece. If the atomizer head is not tightened securely to the base, excess liquid may also leak through the bottom and out of your tank. All parts must be assembled securely to ensure that there is no leakage through the glass, the atomizer head, or the base. Please ensure that all o-rings/seals are seated properly as well.


If your Kanger Subtank is leaking, it is more than likely the issue is with the OCC coil. We've found that some Subtank OCC coils do not have enough cotton in them to prevent the liquid inside of the tank from slowly seeping out through the center tube and the airflow holes. This type of slow leakage is a common issue with Clearomizers. However, the OCC coils are one of the few coils that can be easily modified because of the large opening and horizontal coil.

Thursday, February 12, 2015

Announcing the Authentic Innokin iTaste MVP3 30 watt 9 Volt VV/VW USB

Inoken MVP V3
The Vapor Lady Lounge is Proud to offer the Authentic Innokin iTaste MVP3. It packs 30Watts of power and fires as low as .4 Ohms for Sub Ohm atomizers now in blue and pink. The iTaste MVP3.0 advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology features a greater range of Variable Voltage 3.0V-9 V, and Variable Wattage 6.0 – 30.0 Watts for Regulated Vaping.
Innoken MVP 3

The iTaste MVP3.0 has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, an included ego adaptor and a replaceable integrated micro-USB charging cable.

The iTaste MVP3.0 e cigarette has a variable voltage range of 3.0 – 9.0 volts adjustable in 0.1 volt increments and a variable wattage range of 6.0 – 30.0 Watts, adjustable in 0.5 watts increments.

The iTaste MVP3.0 uses vRMS DC current and is very accurate with a power deviation of 0.1 Watt. The full 30Watts is precisely maintained between resistances of 0.4 to 2.5 ohms. There is no wasted power and exact accuracy means you are always vaping the power level that you choose. vRMS provides superior precision in delivering the exact wattage Ohm’s Law requires and stable power means better vapor.
MVP 3.0

The Primary Features of The iTaste MVP3.0
Battery Level Indicator:
The iTaste MVP3.0 e cgiarette battery has a tri-color LED on the top.
Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off.
30 Watt MVP3

Yellow = Half Power.
Red = Low Power. Charge the MVP3.0.
Variable Voltage:Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments.
Variable Wattage:Wattage can be adjusted from 6.0 – 30.0 Watts in .5 watts increments.
Low Voltage Warning:The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste MVP3.0 Advanced Personal Vaporizer will automatically power off.
Short Circuit/Atomizer Protection:Short Circuit/Atomizer Protection protects the iTaste MVP3.0 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.
The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on.
‘Vape while charging’ Technology
The iTaste MVP3.0 is recharged with a Micro USB cable. When plugged into a power source the iTaste MVP3.0 can also be vaped and charged at the same time with Innokin Technology’s ‘Vape while you charge’ pass-through technology.
Remembers last Voltage or Wattage setting:When the iTaste MVP3.0 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the iTaste MVP3.0 is powered on.
Portable power source for electronic products:To charge your portable electronic device with the iTaste MVP3.0 plug the built-in Micro USB cable into the electronic device and power on the MVP3.0. The included iTaste MVP3.0 starter kit charging cable can also be used. Plug the larger USB port into the MVP3.0 and the Micro-USB into the electronic device and power on the iTaste MVP3.0. You may only charge one electronic device at a time. Do not attempt to charge more than one device at the same time or you may damage the device.
High compatibility 510 connector:
The iTaste MVP3.0 510 threading is compatible all standard 510 clearomizers & atomizers including the iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30S and the Gladius-M.
Technical Specifications:
Operating Voltage:    3.0V-9 V
Operating Wattage:   6.0W-.30W
Standby current: 100uA max
Maximum output Wattage: 30W
Maximum output Current:10A
Maximum output Voltage: 9V
Clearomizer Resistance: 0.4 Ohm (minimum)
Battery: Built-in 3800 mAh polymer Li-Ion rechargeable battery.
Charging: Micro USB DC5V/1A
OUTPUT port :DC5V /1A
Whats in the Box:
1x iTaste MVP3.0 battery
1x USB charger cable
1x eGo Threading Adaptor
1x English manual
1x Acrylic box

Available colors:
Blue, Pink

Monday, February 9, 2015

Non Sub oHm Build on a Dripping Atomizer Regulated MOD or PV, High ohms Means Safer Vape!

Typical Dual Coil Sub-ohm Build on a Mech MOD

A Good Friend taught me that with a good regulated MOD you can wrap a higher ohm coil, (above 1ohm) and still get massive clouds and even better flavor!

I stayed away from dripping with an atomizer because of the inherent risk of sub ohm vaping on an Unregulated Mechanical MOD or PV.

Even with the proper batteries charged fully I felt like I was holding a pipe bomb in my hand and flinched a bit when I tried it.

Regulated High ohm Dripping is the Next Big Thing and is bringing more and more Vapers into the dripping fold with its safer and more flavorful build.

First you need a Dripping atomizer, ANY dripping atomizer, (even that old iGo W4), I am a huge Fan of the Cloned Doge V2, The Mutation X V2 and the Dark Horse V2. I know there are newer atties on the market but these have passed the test of time and hard usage and will remain the ideal in vaping for some time, until they come out with something revolutionary. After all, it's all in the build and air flow, not really about the type of atomizer.

Dark Horse RDA
You will also need a regulated MOD or PV. I recommend something with wattage that goes to 30 watts or higher just as a good investment idea, we are a long way from being done with atomizer, dripper and tank designs meaning sooner or later someones going to build something you'll want the wattage for. The VaporFlask (original or clone), is a good option, as well as the Zen ZNA or the MVP 3. The eLeaf iStick is a contender for those on a budget, but keep in mind it is a budget variable wattage device and may not act as reliably as you need.

Now for this build you have to chuck all the Sub ohm ideas out of your head and think "Single Coil". Yes, I said Single Coil. So many of us think if the dripper has the room for it, we have to stuff as many coils into the build as will fit. Not true. I single high ohm coil is going to do all the work and you'll be surprised at how good this is going to vape.

Doge V2 RDA
Start with 28 gauge Kanthal and the Steam Engine Coil Wrapping Calculator if you are working with other types of wire. Plug in your numbers and remember, this is a High ohm build so you want a target build of about 2.4-2.6 ohm. On a single coil. This will mean about 12 wraps on a 3ml winding jig, or something close to that considering the calculator.

Other than this obvious difference, the build is the same as the old Low ohm or sub ohm build. Wrap your coil, anneal your coil with a torch, Mount to the posts of your atomizer, check your ohms and for shorts, snug down your screws and wick with your organic cotton or other safe wicking material. Juice up your cotton and coil, recheck your ohms and for shorts again, then mount on your regulated device, turn up to about 15 watts at first and vape away. Keep upping your wattage until you get the vape you want, I find my sweet spot at about 20 watts. Yes, I said 20 watts. Because of the higher ohm build you don't have to throw the heat to it to get a great vape. So that's it! Simple and easy!

Mutation X V2 RDA
I never seriously considered dripping until I found this safer way to vape.. low ohms on a Mechanical MOD can be dangerous in inexperienced hands, and while I consider myself a Two Year Veteran wrapping coils for Protanks, Kayfuns and atomizers in general, battery safety kept me out of this arena for some time. Now I can blow clouds with the Big Boys in a safe and more flavorful manner without worrying about my batteries venting due to sub ohm mega power draws.

I'm not knocking Sub ohm Vapers, they are a force that isn't going anywhere too soon. I have friends that still wrap .03ohm and haven't blown themselves up yet, but I don't like to stand too close to them when they start ripping on that mech MOD. Granted, most Regulated MODs now can fire an atomizer or tank down to .5ohms, but I think you'll find the smoother, cooler flavor of the higher ohm build to be an excellent thing to try and perhaps even adopt as your favorite way to vape!

Single Coil High ohm Coil On Vaporflask Clone















Vapor Flask V3 clone Box Mod in Red or Blue!

Here is a New Product I am offering that is very exciting! I love the shape, color and design of the Vapor Flask Clone and am proud to be able to offer it to you! You can purchase it by visiting my Vapor Lady Lounge Store, by clicking on the photo below of the link within the description!
http://vaporladyloungestore.com/collections/most-popular-items/products/vaporflask-clone-50-watt-box-mod

Featuring a sleek aluminum body, this Vapor Flask V3 clone Box Mod fits perfectly in your hands. It is equipped with the highly sophisticated clone DNA 50 chip, which helps it realize its great performance! 4 Vent holes on each of the 2 battery covers, 510 threaded Spring-Loaded Brass. This unit can be used for sub ohm vaping on an RDA or other device from 0.2-3.3ohms and can be used for higher ohm builds and tanks. This is NOT the temperature control model.
VaporFlask V3 Clone, with a DNA 50 watt chip. Copper 510 connector and bottom battery terminals create good conductivity and the variable wattage goes to 50 watts! Unlike the genuine VaporFlask, (Not to be confused with the Original!), this clone has no USB recharging or pass through function. The 18650 batteries must be removed to be recharged.
Intelligent LED display screen displays:
  • battery capacity
  • wattage, voltage
  • resistance
Material: Aluminum
Battery: 2x 18650 batteries
Thread: 510 thread
Voltage Range: 1.0v-11.5v
Wattage Range: 5w-50w
Atomizer Resistance: 0.2-3.3ohm
Size: 54x110x28.5mm Weight 300g
This unit uses two 18650 VTC type batteries with a rating of 25 amps or more. The batteries must be "Matched and Paired" for safety, (which means you should buy two batteries of the same brand and from the same lot to be used together and charged together throughout their lives).
What’s in the box?
    •    1x Vapor Flask box mod
Featured with sleek aluminum body, this Vapor Flask V3 clone Box mod fits perfectly in your hands. It is equipped with the highly sophisticated DNA 50 chip, which helps it realize its pretty good performance! - See more at: https://www.ecigarettelobby.com/vapor-flask-v3-clone-box-mod.html#sthash.HVN7Hsds.dpuf
Intelligent LED display screen displays: battery capacity, wattage, voltage, resistance 4 Vent holes on the battery covers Short circuit protection 510 threaded Spring-Loaded Brass Contact High wattage up to 50W Micro USB Charger Dual 18650 batteries Serialized - See more at: https://www.ecigarettelobby.com/vapor-flask-v3-clone-box-mod.html#sthash.HVN7Hsds.dpuf
Intelligent LED display screen displays: battery capacity, wattage, voltage, resistance 4 Vent holes on the battery covers Short circuit protection 510 threaded Spring-Loaded Brass Contact High wattage up to 50W Micro USB Charger Dual 18650 batteries Serialized - See more at: https://www.ecigarettelobby.com/vapor-flask-v3-clone-box-mod.html#sthash.HVN7Hsds.dpuf
Intelligent LED display screen displays: battery capacity, wattage, voltage, resistance 4 Vent holes on the battery covers Short circuit protection 510 threaded Spring-Loaded Brass Contact High wattage up to 50W Micro USB Charger Dual 18650 batteries Serialized - See more at: https://www.ecigarettelobby.com/vapor-flask-v3-clone-box-mod.html#sthash.HVN7Hsds.dpuf

Sunday, February 8, 2015

Vapor Lady Lounge Show LIVE First Half 2/3/15

The Vapor Lady Lounge Show Live is presented every Tuesday Night at 8pm EST at:
http://vapers.tv/vaporladylounge.

Sit back, relax and join my Sister and I for an hour of Vaping Conversation and fun!

First hour of the Vapor Lady Lounge show 2/3/15 in which we discuss various starter and intermediate devices and tanks.

Related Posts Plugin for WordPress, Blogger...